15% off any mix of 12 or more glues. Free UK delivery over £30! Order before 1PM for Same Day Dispatch



Titebond Cold Press Veneer Glue

Regular price £18.98

Tax included. Free UK shipping on all orders over £30.

Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a modWood Glueerate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.

Features & Benefits

  • Economical alternative to contact cemenr
  • Moderate speed of set
  • Safe, non-flammable
  • Formulated to minimise "bleed-through"
  • No harmful vapours

Physical Properties

Type Modified PVA emulsion
Calculated Voc 2.0 g/L
State Liquid
Weight Per Gallon 9.2 lbs.
Color Tan
Dried Film Dark Brown
Flashpoint > 200°F
Solids 0.42
Freeze/Thaw Stability Stable
Viscosity 4,500 cps
Ph  4.9
Chalk Temperature To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life 12 months in tightly closed containers at 70°F

Application Guidelines

Application Temperature Above 50°F
Open Assembly Time 15 minutes (70°F./50% RH)
Total Assembly Time 15-20 minutes (70°F./50%RH)
Minimum Required Spread Approximately 6 mils or 250 square feet per gallon
Required Pressure Application 100-250 psi, depending on substrates
Method Of Application For most consistent coverage a mechanical spreader is recommended.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations Titebond Cold Press for Veneer is specifically designed for veneering and is not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.