Titebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes. Titebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water.
Features & Benefits
- Fast set - shortens clamp time
- Solvent-resistant
- Unaffected by finishes
- FDA approved for indirect food contact
- Bonds stronger than wood
- Excellent sandability
- Easy cleanup with water
Physical Properties
Type |
Aliphatic resin emulsion |
Calculated Voc |
10.7 g/L |
State |
Liquid |
Weight Per Gallon |
9.2 lbs. |
Color |
Yellow |
Dried Film |
Translucent |
Flashpoint |
> 200°F |
Solids |
0.46 |
Freeze/Thaw Stability |
Stable |
Viscosity |
3,200 cps |
Ph |
4 |
Chalk Temperature |
To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application. |
Storage Life |
24 months in tightly closed containers at 75°F |
Application Guidelines
Application Temperature |
Above 50°F |
Open Assembly Time |
4-6 minutes (70°F./50%RH) |
Total Assembly Time |
10-15 minutes (70°F./50%RH) |
Minimum Required Spread |
Approximately 6 mils or 250 square feet per gallon |
Required Clamping Pressure |
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) |
Method Of Application |
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush. |
Cleanup |
Damp cloth while glue is wet. Scrape off and sand dried excess. |
Limitations |
Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN. |