Titebond No-Run, No-Drip Wood Glue is the thickest, fastest-drying glue available for use with porous and semi-porous materials. It is ideal for finish trim, crown molding, baseboards, window casings and other applications requiring a professional-strength, no-run wood glue. Titebond No-Run, No-Drip provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes.
Features & Benefits
- Thick - no runs, no drips
- Fills small cracks and gaps
- Unaffected by finishes
- Good heat resistance
- Versatile - bonds most porous and semi-porous materials
- Strong initial tack and fast set
- Excellent sandability
- Non-flammable and no offensive odour
Physical Properties
Type |
Thixotropic polyvinyl acetate |
Calculated Voc |
2.4 g/L |
State |
High-viscosity liquid |
Weight Per Gallon |
9.0 lbs. |
Color |
Beige |
Dried Film |
Translucent |
Flashpoint |
> 200°F |
Solids |
0.6 |
Freeze/Thaw Stability |
Stable up to 2 cycles |
Viscosity |
36,500 cps |
Ph |
4.8 |
Chalk Temperature |
To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application. |
Storage Life |
24 months in tightly closed containers at 75°F |
Application Guidelines
Application Temperature |
Above 50°F |
Open Assembly Time |
3-5 minutes (70°F./50%RH) |
Total Assembly Time |
10-15 minutes (70°F./50%RH) |
Minimum Required Spread |
Approximately 6 mils or 250 square feet per gallon |
Required Clamping Pressure |
Enough to bring joints tightly together (generally, 100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods) |
Method Of Application |
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush. |
Cleanup |
Damp cloth while glue is wet. Scrape off and sand dried excess. |
Limitations |
Titebond No-Run, No-Drip Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN. |